The Alienware 13 R2 is probably the best compact gaming rig out there, so as you'd expect the Linux the support is underwhelming, to say the least. This setup assumes we want to keep the Windows 10 install and have a dual-boot system.
First we need to shrink the main Windows partition (a guide for that can be found here on How-to Geek). By default Dell makes some extra partitions for the recovery and the Windows installation kit. Also, Windows 10 adds its own two extra system partitions, so be careful not to mess those up. I did a backup of the Dell ones and deleted them, but you can keep them, it should be the same either way.
I was unable to to get enough space for Ubuntu without disabling the
Page File and
System Restore, shrink partition and enable them back again, but you might not have to.
I also disabled the
fastboot feature provided since Windows 8. What this does is putting the computer in hibernation instead of completely turning it off when the user issues a shut down from the
Power menu. This allows for faster startup times when turning the laptop back on, but it can interfere with restarting when you are trying to reboot to get into Ubuntu instead.
Make sure you have a wired network connection before starting this, otherwise you won't be able to get the updates for the video and wi-fi cards.
When you get to the install menu you need to change the boot sequence a bit. With
Install Ubuntu selected, press
e and add
nomodeset just after
F10 to continue booting. You should be able to install the system as you normally would.
I was unable to boot properly into Ubuntu after install and it was relatively hard to pinpoint the issue because the error messages would appear only briefly on screen. After some research I concluded that the video card was the culprit and had to install the proprietary drivers to get things working.
To do that boot into recovery mode by selecting
Advanced options for Ubuntu and then the second option in the boot menu, the one that has appended
recovery menu to the latest kernel version string. You will be presented with several options as seen below:
Enable networking option and press
OK. After that is finished choose the option to
Drop into root shell prompt. In the shell do:
$ ubuntu-drivers devices == /sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0 == model : GM107M [GeForce GTX 960M] modalias : pci:v000010DEd0000139Bsv00001028sd000006E1bc03sc02i00 vendor : NVIDIA Corporation driver : xserver-xorg-video-nouveau - distro free builtin driver : nvidia-352-updates - distro non-free driver : nvidia-352 - distro non-free recommended $ apt-get install nvidia-352 # the number must match the version you got above $ nvidia-xconfig $ reboot
There is a good part though to using proprietary driver, you can choose the video chipset the OS uses, either nVidia or Intel (which promises longer battery life). The not so cool part is that this switch does not happen on the fly and you have to log out and log in again to apply the change.
Getting the Synaptic touchpad to work was a lucky find. After doing a lot of messing around with
xinput and having little success, I found a seemingly unrelated post that suggested blacklisting the
i2c_hid kernel module:
$ sudo echo "blacklist i2c_hid" >> /etc/modprobe.d/blacklist.conf $ sudo reboot
UPDATE: This should work with Ubuntu 15.10 out of the box after install and system updates. They seem to have added the patch around 6th of December 2015.
The wi-fi was the nastiest part, and it seems to be a recurring theme when it comes to installing Linux on a more bleeding edge laptop. My initial research found this bug report: "Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] is not supported" and it seemed like the chances were pretty slim on getting this working with 15.04 which had kernel 3.19 still.
For a while the solution was a patch from kernel upstream, but it was pretty ugly. Then a
dkms package was released, namely
ath10k-dkms_1.0_all.deb and then an updated version
ath10k-dkms_1.1_all.deb (can't find any reliable download links any more, even though this might be the only way to get the wi-fi working in 15.04).
The solution should have came with the release of Ubuntu 15.10. Not only it is the most stable October version in quite a while, it also comes with kernel 4.2 which in theory should have included the binaries for the Killer NIC chipset, sadly it did not. The bug report description said it will be available via an
apt-get update within a week, but I can't figure out when that edit was made to the ticket (they should have made a new post). So I ran out of patience and just downloaded the binaries from kernel.org and copied them over into
/lib/firmware/ath10k/. Rebooted and everything works as it should.
You are out of luck here, friend! Pressing
Fn+F12 does not turn off/on the keyboard lighting and the only lead I found on changing the light configuration was this Python package on github, but is almost 2 years old and targeted at the M14xR1 model (did not test it on my machine).
The good news is that customizations done in Windows to any of the LEDs carries out to Ubuntu also.
Alienware 13 R2 is a great and powerful gaming laptop, and with a bit of work it behaves really well under Linux also. I played the native Steam version of "Bioshock Infinite" on high settings with very good frame rate under Ubuntu 15.10, so I am very happy with how things turned up.
PS: For this blog post I wanted to do also a recording with "Bioshock Infinite" running native on Ubuntu, but the frame rates while recording were horrendous and lowering the settings would not have done the game justice.Go Top